Description
Welcome the ultimate blend of warmth, ambiance, and elegant design into your home this winter season with the Enerzone Solution 3.5 Wood Burning Insert. Specifically designed to replace outdated and ineffective masonry fireplaces, the Solution 3.5 delivers exceptional comfort, performance, and efficiency while being gentle on the environment. Experience delightful transformation in your large living spaces or open-concept home with this wood insert, perfect for cozy gatherings.
The Enerzone Solution 3.5 Wood Burning Insert makes a distinctive statement with its advanced secondary combustion system generating mesmerizing flames that dance gracefully between the logs, visible through the large glass surface. Tailor the insert to your personal preferences and blend it seamlessly with your existing interiors by selecting faceplates and trims of your choice. For those who yearn to indulge in the soothing sounds of crackling wood, a firescreen is also available to complement and enhance the charm of your new wood fire. Elevate your home comfort experience as the cold winter months approach, and turn your home into a sanctuary of warmth, style, and serenity with the unrivaled Enerzone Solution 3.5 Wood Burning Insert.
- Firebox volume of 3.5 cu. ft.
- Single glass door with cast iron frame
- Stainless-steel secondary-air system improving gas combustion
- EPA 2020 approved, high efficiency certified appliance
- Compatible with 25ft or 35ft 6" dia. Liner Kits (Click Here to View)
Options
Additional Information
Appliance performance ( 1 )
( 1 ) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
( ) Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
( 2 ) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
( 3 ) As measured per CSA B415.1-10 stack loss method.
( 4 ) Higher Heating Value of the fuel.
( 5 ) Lower Heating Value of the fuel.
( 6 ) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
( 7 ) Optimum overall efficiency at a specific burn rate (LHV).
( 8 ) The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
( 9 ) This appliance is officially tested and certified by an independent agency.
( 10 ) Carbon monoxyde.
General features
Specifications
| Fuel type | Dry cordwood (16" recommended) |
| Recommended heating area-ft² : ( ) | 1,000 - 2,700 |
| Overall firebox volume-ft³ | 3.5 |
| EPA loading volume-ft³ | 2.88 |
| Maximum heat output-dry cordwood : ( 2 ) | 110,000 BTU/h (32.2 kW) |
| Overall heat output rate < : ( 2 ) ( 3 ) | 17,200 BTU/h (5.0 kW) to 57,800 BTU/h (16.9 kW) |
| Optimum overall efficiency : ( 6 ) ( 7 ) | 77 % |
| Optimum heat transfer efficiency : ( 8 ) | 75 % |
| Average particulate emissions rate : ( 9 ) | 1.6 g/h |
| Average CO : ( 10 ) | 73 g/h |
| Combustion technology | Non-catalytic |
| Maximum burn time | 10 h |
| High-efficiency certified appliance | Yes, EPA 2020 approved |
| Maximum log length | 22" |
| Log positioning | Loading over width and over depth |
| Chimney diameter | 6" |
| Flue outlet diameter | 6" |
| Type of chimney | Liner - ULC-S635, CAN/ULC-S640, UL1777 |
| Minimum chimney height (feet) | 15' |
| Baffle type | C-Cast or equivalent |
| Approved for a mobile home installation | No |
| Shipping Weight | 562 lb (255 kg) |
| Door type | Single, glass with cast iron frame |
| Glass type | Ceramic glass |
| Glass surface – dimensions (Width X Height) | 18 3/4" X 12 1/2" |
| Glass air-wash system | Yes |
| Overall dimension (Height) | 24 7/8" |
| Overall dimension (Width) | 30 3/8" |
| Overall dimension (Depth) | 29 1/2" |
| Door opening – dimension (Height) | 10 5/8" |
| Door opening - dimension (Width) | 19" |
| Firebox – dimension (Height) | 12 7/8" |
| Firebox – dimension (Width) | 22 7/8" |
| Firebox – dimension (Depth) | 20 1/8" |
| Firebox lined with refractory bricks for better heat distribution | Yes |
| Stainless-steel secondary-air system improving gas combustion | Yes |
| Steel thickness – body | 3/16" |
| Steel thickness – top | 3/8" |
| Fireplace opening – minimum (Height) | 26 1/4" |
| Fireplace opening – minimum (Width) | 31" |
| Fireplace opening – minimum (Depth) | 18 3/8" |
| USA standard (emissions) | EPA |
| Canadian Standard (emissions) | CSA B415.1-10 |
| USA standard (safety) | UL 1482, UL 737 |
| Canadian standard (safety) | ULC S628 |
| Tested and listed as per applicable standards | By an accredited laboratory (CAN/USA) |
| Warranty | Limited lifetime |
