 |
 |
 |
|
Split Oak Gas Logs
With G4, G45, or G46 Burner Kits
Real Fyre Designer Series captures the realism and subtle nuances of nature to provide realistic, beautiful gas logs. All hand painted and masterfully crafted, the Designer Series is guaranteed to add a touch of elegance to your home.
IMPORTANT INFORMATION:
This is a vented gas log burner system designed to be installed in a wood burning fireplace retrofitted with Natural Gas and burned with the damper open. You cannot install this gas log set in a vent-less firebox, type-b vent (natural vent) gas fireplace or direct vent gas fireplace or any gas or wood burning stove. It burns Natural Gas and is for use indoors only.
Compatible Burners for 24" Split Oak Logs
- G4 Burner System
- With dancing flames and a glowing ember bed, this G4 Glowing Ember Vented Burner System is compatible with most of our gas log sets and controls.
- G45 Burner System - Triple T
- The Triple T features a T-shaped burner that emphasizes its front embers, giving them an even greater dramatic effect, and adds depth to its flames. ANSI Certified Version Available.
- G46 Burner System
- The G46 Burner System is ANSI Certified and features hidden fully installed controls, piezo ignition, and lively flames, all with less BTU's.
Note: Check local building codes and city regulations for any restrictions or conditions regarding gas logs before you purchase or install them.
NOTE: The above sizing may include burners not compatible with this log style or size.
IMPORTANT INFORMATION:
We highly recommend that this log set be purchased with an associated burner from this site. Logs are designed
and manufactured to work with the burners listed. We do not warrant any log set if not purchased with a
burner system as indicated on this site. As always, please call us with questions at 866-238-9228.
Always check local building codes and city regulations for any restrictions or conditions regarding gas logs
before you purchase or install them.
Most fireplaces are tapered (front width is larger than the rear width). The most critical dimension for sizing is the Middle Width Dimension of the fireplace. This will allow the burner to be centered in the fireplace.
Example: 42" (front width) + 24" (back width) = 66" / 2 = 33" middle width
When selecting the proper size log set for your fireplace, the Middle Width Dimension must be greater than or equal to the Middle Width Dimension of the sizes listed below:
|
Log Set Sizes
|
Middle Width (No Valve)
|
Middle Width (SPK Valve)
|
Middle Width (APK/EPK Valve)
|
|
16/19"
|
20"
|
24"
|
26"
|
|
18/20"
|
24"
|
26"
|
27"
|
|
24"
|
28"
|
32"
|
33"
|
|
30"
|
34"
|
38"
|
39"
|
|
36"
|
40"
|
44"
|
45"
|
|
Log Set Sizes
|
Middle Width (SPK Valve)
|
Middle Width (APK/EPK Valve)
|
|
18/20"
|
22"
|
23"
|
|
24"
|
26"
|
27"
|
|
30"
|
34"
|
35"
|
Enter the values below for log sets WITH a valve/remote kit.
Calculation is automatic.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Split Oak Logs
- Superior refractory ceramics ensure the logs retain their strength at high temperatures
- Burns efficiently while protecting natural resources and reducing pollution
- High definition bark and natural colors for an authentic wood look
- Steel rods inserted in each log provides maximum reinforcement
- Radiant heat while in operation and after set has been turned off
- Accessories available to enhance the look of your hearth
- All Peterson vented ceramic refractory gas logs are warranted for as long as you own them (lifetime)
- All Peterson vented burners are warranted for ten (10) years
Control Options for G4 and G45 Burners
AV-18 - Manual On/Off Valve with extension and knob handle
- Light system with a long match or lighter
- Ability to adjust flame height high or low to desirable level of the gas log burner
- 1 Year Warranty
SPK-26 - Low Profile, Safety Pilot Kit with removable knob handle
- Low profile system. Manual valve control. Heat shield included.
- Standing Pilot System. Manual Variable Height
- Valve Temp Rated 300 Degrees
- 100,000 BTU (Nat) / 200,000 BTU (LP)
- 3 Year Warranty
APK-17 - Low Profile, Variable, Automatic Pilot Kit with basic transmitter & receiver
- Low Profile Design. Standing Pilot System. Variable Flame Height
- On/Off Operation. Remote & Manual Use
- Valve Temp Rated 175 Degrees
- 100,000 BTU (Nat) / 200,000 BTU (LP)
- New Aluminum Body
- 2 Year Warranty
APK-15 - Variable, Automatic Pilot Kit with basic transmitter & receiver
- Standing Pilot System. Piezo Igniter Feature
- Variable Flame Height. On/Off Operation
- Remote & Manual Use
- Valve Temp Rated 225
- 85,000 BTU (NAT) / 135,000 BTU (LP)
- 1 Year Warranty
EPK-1 - Electronic Pilot Kit with basic transmitter & receiver
- Electronic Ignition. Non-Standing Pilot
- 2-D Cell Battery powered. Transmitter Included
- On/Off Operation. Intermittent Pilot Ignition
- Remote or Manual Use. Valve Temp Rated 175
- RR-1A Remote Control
- 88,000 BTU (NAT) / 110,000 BTU (LP)
- 1 Year Warranty
Control Options For G46 and ANSI Certified G45 Burners (Assembled with Burner)
- Default (Factory Installed Safety Pilot Kit)
- "11" Series Valve & On/Off Remote
- "15" Series Valve & Variable Remote
- "17" Series Valve & Variable Remote
- "02" Electronic Valve & Remote
|
|
|
|
|
|
|