Evening Fyre Logs
The Evening Fyre, Evening Fyre Charred and the Evening Fyre Split log sets are featured on the advanced G18 vent-free burner system. The logs are sculpted and hand-painted with distinctive charring on the front log, mimicking a wood fire. The dramatic ember bed, with Bryte Coals and two wood chunk decorative covers, enhance the warmth and beauty of the log set.
In Front of The Fireplace:
Be certain that combustible flooring material (i.e.: carpet, tile, etc) is not too close to the vent-free unit. If the vent-free burner system is at floor level or less than 6" above the floor, there MUST be at least 12" of noncombustible material between the front of the fireplace and any combustible flooring.
This burner system is equipped with an Oxygen Depletion Sensor (ODS) safety pilot system. The ODS senses the amount of oxygen available in the room and shuts the burner system off before the oxygen level drops below 18%. The pilot can only be relit when fresh air is available. This may require opening a window or door to another room or cracking the damper open slightly.
NOTE: The above sizing may include burners not compatible with this log style or size.
IMPORTANT INFORMATION:
We highly recommend that this log set be purchased with an associated burner from this site. Logs are designed
and manufactured to work with the burners listed. We do not warrant any log set if not purchased with a
burner system as indicated on this site. As always, please call us with questions at 866-238-9228.
Always check local building codes and city regulations for any restrictions or conditions regarding gas logs
before you purchase or install them.
Ventless Gas Log BTU Calculator!
Ventless gas logs MUST NOT exceed a certain BTU rating based on the size of a room. The formula for calculating the maximum BTU allowed is: Room Width x Room Length x Ceiling Height x 20. You can use this tool below to perform the calculation.
Enter your ROOM DIMENSIONS:
Important Note: Professional Installation is required for all ventless products. Vent Free gas logs are not recommended for use in elevations over 2,000 feet. We advise that you install a high quality Carbon Monoxide Detector if you install a ventless gas log. Some cities do not allow vent free gas logs to be installed in bedrooms, bathrooms or other confined spaces, others do not allow ventless gas logs to be installed at all (California for example). Check local building codes for any restrictions or conditions regarding ventless logs before you purchase or install them.